Automatic Technology Australia GDO-2 SecuraLift Guide de dépannage télécharger pdf (Page 12)

GDO-11v1 SecuraLift

Owner Installation Instructions

ﬁ g

Knockdown C-Rail Assembly

Note: Use the 12 teeth sprocket with Gdo-11v1 opener.

h. Engage the shuttle with the chain index and move

shuttle assembly to the centre of track. Make sure

the chain is engaged into the sprocket and also

wrapped around the centre of the pulley.

i. Use a spring scale to measure required force to pull

the shuttle, adjust 1/2” tension hex bolt (Fig. 09) to

tension the chain.

j. Move the shuttle back to the centre of the track to

re-test the force with spring scale (Fig. 10).

k. Continue to adjust adjust the tension hex bolt until a

force of 8kg to 8.5 Kg is achieved.

Door end Opener end

Tension hex bolt

Centre of the track

9 teeth sprocket

12 teeth sprocket

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 35 36

Pas de commentaire

Automatic Technology Australia GDO-2 SecuraLift Guide de dépannage Page 12